The Pioneer LED utilises high efficiency LED drivers to deliver a safe, continuous output whilst providing a high level of illumination. The Pioneer LED is ideal for the set-up of temporary lighting installations on walkways, corridors, tents, tanks and vessels. The intrinsically safe circuits provide overcurrent, overvoltage, thermal and polarity protection. The Pioneer LED can be powered with 110Vac and 230Vac supplies at either 50 or 60 Hz with a small current draw of 0.2A per light. A 10 metre length of SY cable is supplied with a Zone I EX plug (CEAG/ STAHL/ATX) to suit the worksite or installation. The Pioneer LED comes supplied with a universal bracket for all of the mounting options, of which include: magnet, scaffold, wall and floor stand. To give the Pioneer LED further flexibility, an additional gland and cable can be installed into the Pioneer to allow a chain of lights in series. For example: 12x Pioneer Led lights can be chained together up to 15 metres apart and work of a singular 16A breaker.